Brady® Glow-In-The-Dark Stripesand Solid Tape Part# - 76430
Brand: BRADY®
Part Number: 76430
Weight: lbs
Country of Origin: UNITED STATES
Minimum Order Qty: 1 EA
Features: Brady offers many different exit/directional signs including bradyglo framed and frameless exit signs which are immediately visible in emergency situations | Brady's safety signs use internationally reported pictograms and help promote greater communication of safety messages | Brady B-324 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for sanitary disposal | Charge time of 5 minutes at 1000 lux will charge the sign for (plus 10) hours of glow time | Consistent glow life and unlimited rechargability throughout service life, not recommended for outdoor application
B-324 Brady Glow-In-The-Dark Stripes And Solid Tape. 76430 Hazardous areas are clearly indicated with high visibility Warning Stripe Tape. Brady vinyl tape stands up in the toughest conditions. Colors are sealed beneath protective layer of abrasion resistant clear vinyl. Aggressive adhesive holds on almost any clean, dry surface. Glow-in-the-Dark tapes are made of durable B-324 phosphorescent material. Product size is 2" Width, 15' Length, black and phosphorescent color,stripes style. Brady B-324 Brady Glo material is a glow-in-the-dark (photoluminescent) pressure sensitive polyester used for exit and directional signs, identification of fire alarms and extinguishers, low location egress pathway markings, and directional systems for escape or evacuations routes. Inherent Properties - Brady B-324 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for sanitary disposal. Adhesive type is pressure sensitive acrylic. Substrate type is phosphorescent polyester film. Standard legend colors are black, green, red, and blue. Total thickness (PSTC-33) is 0.008 inches. Adhesive properties are adhesion to stainless steel (PSTC-101), 15 Minute Dwell (average) - 110 ounce/inch, Ultimate Dwell (72 hours). (average) - 110 ounce/inch Abrasion resistance (method 5306 of U.S. federal test method standard no. 191A) CS-10 wheels, 250g weights, Legend withstands up to 100 cycles. CS-17 Wheels, 1000g weights, Substrate withstands up to 9000 cycles. Expected Service Life of Adhesive and Printed Legend Average of 5 years. Gloss (ASTM D-523)is 60 degree- 121 gardner units. Minimum application temperature is 50 degree fahrenheit. Service temperature is -40 degree fahrenheit to 176 degree fahrenheit.
