3M™ Securefit Safety Helmetgreen Reflective Part# - 7100175557
Brand: 3M™
Part Number: 7100175557
Weight: 1.80675 lbs
Country of Origin: POLAND
Minimum Order Qty: 1 CA (4 EA = 1 CA)
Features: COMFORT WITHOUT COMPROMISE: Our proprietary design to our industry-leading innovations, the 3M SecureFit Safety Helmet is engineered with workers in mind. The result is a revolutionary helmet design that delivers comfort without compromise | PRESSURE DIFFUSION TECHNOLOGY: Patented technology reduces forehead pressure by 20% on average compared to 3M conventional helmets | 6-POINT RATCHET SUSPENSION: Allows wearer to customize height and fit | MEETS ANSI SAFETY COMPLIANCE STANDARDS: 3M SecureFit Safety Helmet meets the performance requirements of ANSI Z89.1 | CUSTOMIZE: Tailor your 3M SecureFit Safety Helmet with our line of accessories including 3M Short Visor, 3M U5B Faceshield holder, Reflective Kit, Replacement Chin Straps, Sweatbands, and Replacement Suspension Systems and Straps | For industrial/occupational use only. Not for consumer sale or use.
Tying in a beam 100 feet up. Scaling a 1200-foot tower. When you work at height, this is just another day at the office. But when it comes to safety, 3M believes the bar can always be raised higher. That’s why we’re proud to offer the 3M SecureFit Safety Helmet. From our proprietary design to our industry-leading innovations, the 3M SecureFit Safety Helmet is engineered with workers in mind. The result is a revolutionary helmet design. Comfort without compromise. The 3M SecureFit Safety Helmet X5000 provides comfort and security for workers in a variety of situations because it features climbing helmet-inspired design that meets occupational safety requirements, works with a variety of 3M faceshields, earmuffs and other accessories, and the suspension incorporates exclusive 3M patented Pressure Diffusion technology. The 3M SecureFit Safety Helmet X5000 meets ANSI Z89. 1 and is tested to select impact and penetration requirements of the European EN12492 Mountaineering Helmet Standard for industrial climbing applications*, and is designed to provide head protection from small falling objects. Not only does it have modern climbing-helmet inspired design, it also provides increased comfort and security due to 3M’s Pressure Diffusion technology designed into the suspension. The brimless design helps to allow for enhanced awareness of some hazards. Moreover, the 3M SecureFit suspension uses 3M patented pressure diffusion technology that increases comfort while also providing a secure fit by reducing the force on the forehead up to 20%, compared to 3M conventional helmet suspension. A smooth, easy turning ratchet suspension system allows for tightening of the headband. There are also 15 adjustment settings on the 3M SecureFit Helmet X5000 series that allows for different height and front-to-back adjustments. It sits low on the head to reduce pressure, increase comfort and security. It also comes with a UVicator sensor that changes color as the hard hat is exposed to ultra violet (UV) light. The hard hat should be replaced when the sensor changes from red to white, because the sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. Not only is this helmet equipped with accessory slots and clips that can work with variety of 3M accessories and other 3M PPE products, but it comes in eight colors and is available with 3M Scotchlite reflective material for increased visibility under low light conditions. *EN12492 Shock Absorbing (clauses 4. 2. 1. 1, 4. 2. 1. 2, 4. 2. 1. 3, 4. 2. 1. 4) and Penetration (clause 4. 2. 2). Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www. 3M /PPE.
