Aervoe 16-Oz. Aerosol Cutting Oil- Water-Based Part# - 890

Aervoe 16-Oz. Aerosol Cutting Oil- Water-Based Part# - 890

Brand: AERVOE

Part Number: 890

Weight: 1.08 lbs

Country of Origin: UNITED STATES

Minimum Order Qty: 1 CS (12 CAN = 1 CS)

Features: This non-flammable, water-based cutting oil improves metal cutting operations and increases efficiencies in machining operations | Reinforced with high-viscosity oils and sulfur-free, extreme pressure additives | Prolongs tool life, reduces tool sharpening, and downtime | Applications: Sawing, tapping, grinding, machining, threading, and drilling. Do not use on electrical equipment or machinery while in operation | Made in the USA!

Description: Aervoe Cutting Oil is a non-flammable, water-based, industrial strength lubricant formulated to improve metal cutting operations. It is reinforced with high viscosity oils and sulfur free extreme pressure additives. Adheres to the surface, and resists run off or breakdown. Prolongs tool life and cutting edge by lubricating and cooling at the cutting point. Benefits: Keeps cutting and drilling tools cooler, thereby lengthening useful life. Carries heat away from the tool and cutting edge. The aerosol version allows for precision application. An extension tube is included for hard to reach places and applies directly to work areas, reducing waste. Water based formula provides for low odor, and washes off easily with commercial cleaners, and/or warm water. Contains no ozone depleting substances. Uses: Use Aervoe Cutting Oil on turret lathes, gear cutters, broaches, and automatic screw machines, and for sawing, tapping, machining, threading, and drilling. Effective on both ferrous and nonferrous metals. Directions: Aerosol: Shake well before use. Attach extension tube for pinpoint control, and direct spray pattern 3 to 5 inches from the surface to be coated. Apply as often as necessary to maintain cooling action. Bulk: Apply with any type of hand pump applicator, cloth, brush, or automated sump system. Add water as needed for thinning. Washes off easily with commercial cleaners and/ or warm water and cloth. Use safety glasses to protect against spatter inherent in application mode. Do not use on electrical equipment or machinery while in operation. Limitations: Please refer to the Safety Data Sheets for specific information on material hazards, etc. Should not be used on magnesium because of fire danger with water contact. This product can and may discolor copper and copper based metal compounds.