General Tools Depth Gage & Angle Gage Part# - 444
Brand: GENERAL TOOLS
Part Number: 444
Weight: 0.02 lbs
Country of Origin: INDIA
Minimum Order Qty: 1 EA
Features: This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface | The hardened steel base is grooved on both sides to deliver accurate angles; Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides | The rule can also be used as a depth gage for measuring small holes and slots | Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base | This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base
From the ManufacturerThe depth/angle gage make precise depth measurements in small holes and slots. The 6" x 1/4" etched stainless steel rule is graduated in 32nds and 64ths. It has a 2-1/2" hardened steel base. Conforms to government specification GGG-G-17b.
