Kidde Smoke Alarm-Ionization-Battery Backup Part# - 21006378
Brand: KIDDE
Part Number: 21006378
Weight: 0.5 lbs
Country of Origin: PEOPLE'S REPUBLIC OF CHINA
Minimum Order Qty: 1 CA (6 EA = 1 CA)
Features: Easy Installation - Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. | Fewer callbacks - One button design for easy operation and less confusion. Operates Hush and alarm test. Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp. Dust cover protects sensor from contaminates during construction reducing nuisance alarms. | User-friendly features - Tamper resist locking feature deters alarm theft. Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system. | Interconnectable - Connect up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user’s guide for complete instructions. | Battery backup - 9v battery backup (included). | Hush feature temporarily silences nuisance alarms | One touch test button tests unit's electronic circuitry | Battery backup 9V battery included | Tamper resist locking pin helps deter alarm tampering and theft | Kidde smoke alarms meet the UL requirements
Amazon.comThe AC-powered, hardwired Kidde i12040 ionization smoke alarm is designed to protect you and your family from the dangers of smoke and fire. This smoke alarm's trademarked hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is working. This wire-in smoke detector also has a battery-backup feature (with included 9-volt battery). Keep your family safe with this hardwired Kidde i12040 smoke alarm. Kidde i12040 Wire-InIonization Smoke AlarmAt a Glance: Ionization sensing technology detects invisible fire particlesBattery backup for continuous protection in case of power outage (battery included)Smart hush feature silences nuisance alarmsPre-stripped wiring harness with tinned strands10-year limited warrantyFeaturesThe Kidde i12040 smoke alarm offers a tamper-resistant feature to deter vandalism or theft and a smart interconnect system that connects with up to 24 Kidde devices--including other smoke alarms plus carbon monoxide and heat alarms. The battery-backup feature (9-volt battery included) provides protection even during power outages when many CO incidences occur. It has a large mounting base that helps protect surface paint from dirt and covers imperfections, and its pre-stripped wiring harness has an easy-off cap and tinned strands to increase conductivity.By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.The Kidde i12040 smoke alarm uses ionization sensing technology, which may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde recommends that both ionization and photoelectric smoke alarms be installed to insure maximum detection. What's in the BoxOne Kidde i12040 120V AC wire-in smoke alarm, one 9-volt battery, and operating and installation instructions.Product DescriptionThe Kidde i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 10-year limited warranty.From the ManufacturerThere are only minutes to escape a house fire. The sooner you hear the smoke alarm, the sooner you can get out safely. Kidde interconnected ionization smoke alarms provide early warning against fire by linking together the smoke alarms in your home, dramatically increasing your ability to hear an alarm anywhere, regardless of where the fire starts. This alarm is a 120V AC powered ionization smoke alarm with 9V battery back-up and hush feature. This smoke alarm has the ability to function as a single unit or in an interconnected system. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms, and outside of sleeping areas and