Kidde Smoke Alarm-Ionization-Hush Button Part# - 21006376
Brand: KIDDE
Part Number: 21006376
Weight: 0.5 lbs
Country of Origin: PEOPLE'S REPUBLIC OF CHINA
Minimum Order Qty: 1 CA (6 EA = 1 CA)
Features: Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy-off cap does not require stripper tool. | Interconnectable with up to 24 devices (of which 18 can be initiating including smoke, CO and heat alarms. | Battery backup provides protection in case of power failure | UL listed, 10 year warranty | Front battery door makes replacing the battery easy for anyone. | Note: Kindly refer to the user manual provided as a PDF manual in the product description section
Amazon.comThe AC-powered, hardwired Kidde i12060 ionization smoke alarm is designed to protect you and your family from the dangers of smoke and fire. This smoke alarm's trademarked hush feature allows you to silence nuisance alarms, while an indicator LED and a test feature let you easily confirm that the alarm is working. This wire-in smoke detector also has a battery backup feature (with included 9-volt battery), and its front battery door makes replacing the battery easy for anyone. Handy battery door makes replacing batteries a snap. Kidde i12060 Wire-InIonization Smoke AlarmAt a Glance: Ionization sensing technology detects invisible fire particlesBattery backup for continuous protection in case of power outage (battery included)Front battery door makes replacing the battery easySmart hush feature silences nuisance alarmsPre-stripped wiring harness with tinned strands10-year limited warrantyFeaturesThe Kidde i12060 smoke alarm offers a tamper-resistant feature to deter vandalism or theft and a smart interconnect system that connects with up to 24 Kidde devices--including other smoke alarms plus carbon monoxide and heat alarms. The battery-backup feature (9-volt battery included) provides protection even during power outages, when many CO incidences occur. The front-loading battery door allows users to change the battery without removing the alarm from the mounting bracket, making battery replacement easy and convenient. It has a large mounting base that helps protect surface paint from dirt and covers imperfections, and its pre-stripped wiring harness has an easy-off cap and tinned strands to increase conductivity.By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.The Kidde i12060 smoke alarm uses ionization sensing technology, which may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde recommends that both ionization and photoelectric smoke alarms be installed to insure maximum detection. What's in the BoxOne Kidde i12060 120-volt AC wire-in smoke alarm, one 9-volt battery, and operating and installation instructions.Product DescriptionThe Kidde i12060 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Power Source: 120VAC (80mA), 60HZ, 9V battery backup.From the ManufacturerThere are only minutes to escape a house fire. The sooner you hear the smoke alarm, the sooner you can get out safely. Kidde interconnected Ionization smoke alarms provide early warning against fire by linking together the smoke alarms in your home, dramatically increasing your ability to hear an alarm anywhere, regardless of where the fire starts. This unit is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The front load battery operation speeds installation and reduces battery replacement time and effort by eliminating the need to remove the alarm from the ceiling. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. This model also includes a Hush feature, which allows you to quickly silence nuisance alarms. Replace smoke alarms every 10 years. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than P
