Milwaukee® Tool 4-1/2X1/4X7/8" Cutoff Wheel For Ss Or Metal T27 Part# - 49-94-4520
Brand: MILWAUKEE® TOOL
Part Number: 49-94-4520
Weight: lbs
Country of Origin: PEOPLE'S REPUBLIC OF CHINA
Minimum Order Qty: 1 PKG (10 EA = 1 PKG)
Features: 5 Milwaukee Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Milwaukee 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor | Engineered in Brookfield WI with Premium White Brown Fused Aluminum bound proprietarily together with Phenol Resin bond allows for optimal grain ware for consistent grinding PERFORMANCE, AGGRESSIVITY & BALANCE, grinding longer and faster than other wheels in its clas | High-performance brown fused aluminum grain and hard bond enable these Makita wheels to consistently grind all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professionals | Carefully selected Grain Grit & Wheel 1/4" Thickness provide balanced Grind Life, Stock Removal Rate, Balanced Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup | Coarse 24 grit grains are used for rapid stock removal and are designed for hard General Steel and Welding applications | Quality Assured, Aggressive and Long Life for consistent performance in the most demanding applications
Optimize your metal grinding work with these 5 Milwaukee Premium 4-1/2” Grinding Wheels for Metal, at a 15-30-degree angle, to the work surface, applying the proper amount of pressure to allow the grinding wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient grinding action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient grind and minimize heat build-up. Consider using light pressure and a consistent motion throughout the grind for the fastest grind-rate and prolonged wheel life. Excessive pressure through the grind causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life.For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient grinds.
