Pferd 1X1X1/4 Ceramic Mtd Fw -1/4 Shank 80G Part# - 45281
Brand: PFERD
Part Number: 45281
Weight: 0.2 lbs
Country of Origin: SPAIN
Minimum Order Qty: 1 EA
Features: High stock removal due to the aggressive coated abrasive | High flexibility | Suitable for stainless steel (INOX), titanium and nickel and cobalt-based alloys | Available in grit 80 | Built with ceramic oxide co-cool abrasive material
PFERD mounted flap wheel for aggressive grinding with maximum stock removal, especially on poor thermal conductive materials such as stainless steel and nickel-based alloys. Grinding additives in the coating improve stock removal, prevent clogging and allow cooler grinding. The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configuration. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. PFERD mounted flap wheels are designated "flap wheels with shaft" according to ISO 3919. Advantages: High flexibility; High stock removal due to the aggressive coated abrasive; Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times; Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners. Application examples: Fine grinding on radii in tool and mould construction; Machining of small and hard-to-reach areas in apparatus engineering and tank construction; Machining of fittings made out of non-ferrous and light metals; Grinding of turbine blades in aircraft engine construction and repair. PFERDERGONOMICS recommends mounted flap wheels to sustainably reduce vibration and noise levels during use and to improve working comfort. Specification: Diameter (inches): 1; length (inches): 1; Shank diameter (inches): 1/4; Recom. Speed RPM: 15,000; Maximum Rotational Speed (RPM): 25,000; Abrasive: Ceramic Oxide CO-COOL; Grit size: 80.