Scotch® Scotch Masking Tape 2020-18A 18 Mm X 55 M Part# - 7100186349
Brand: SCOTCH®
Part Number: 7100186349
Weight: 1 lbs
Country of Origin: CANADA
Minimum Order Qty: 1 CA (48 RL = 1 CA)
Features: READY. SET. TAPE!: 1 roll of 0.70 inches x 60.1 yards of Scotch Contractor Grade Tan Masking Tape, a general purpose masking tape designed for use on non-damageable surfaces; one 60 yard roll will cover a 15x15 room | DAMAGE-FREE STRONG ADHESIVE: Masking tape can stay on for up to three days on interior surfaces and one day on exterior surfaces, and it removes easily without leaving a sticky residue behind | CONQUER MOST SURFACES: Masking tape 0.70 inches wide that's designed for use on vinyl, carpet, metal and plastic | TACKLE INDOORS AND OUTDOORS: Tape with a strong adhesive that can be used as an indoor or outdoor tape | SUSTAINABILITY: Adhesive tape made from 50% renewable resources with a 3-inch core made from 70% post-consumer waste | HOW TO USE: Let the firmly applied painters tape set for 30 to 60 minutes before starting to paint, and when paint is dry to the touch, lift tape up slowly to remove at a 45-degree angle
Scotch Contractor Grade Masking Tape is a general-purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal and plastic for the protection you need to get the job done. This masking tape pack contains adhesive tape that can stay on for up to three days on interior surfaces and one day on exterior surfaces and removes easily without leaving behind a sticky residue. For those looking for a 1 inch masking tape, this product is a perfect choice because it’s made with strong adhesive to be used both indoors and outdoors. Made from 50% renewable resources with a core made from 70% post-consumer waste, this tape is made in a site certified for energy management. To use, apply the masking tape onto the surface while pressing down firmly. When using as a painter's tape, let the tape set for 30 to 60 minutes before painting. Wait until the paint is dry to the touch before removing the used paint masking tape. Lift the tape up by slowly pulling it back on itself, then remove it at a 45-degree angle. Scotch Brand offers a full line of tapes specifically designed for the various demands of the project/job.
