Wiha Tools Insulated 80 Piece Toolset With Rolling Tool Ca Part# - 32800
Brand: WIHA TOOLS
Part Number: 32800
Weight: 41.5 lbs
Country of Origin: GERMANY
Minimum Order Qty: 1 EA
Features: Includes: 6.3”Long Nose Pliers|6.3”Diagonal Cutters|8.0”Long Nose Pliers|8.0”High Leverage Cutters|6.3”Bent Nose Pliers|6.3”Cable Cutters|6.3”Long Flat Nose Pliers|6.3”Stripping Pliers|9.0”Combo Pliers/Crimpers|8.0”Adjustable Wrench|Slotted|Phillips|Xeno Slotted|Phillips Terminal|Square|TORX|Cable Knife|2 Meter Ruler|Inch Sockets|Metric Sockets|Ratchet 3/8”Drive|4.9” Extension 3/8”Drive|SAE Nut Drivers|Nut Drivers|T-handle SAE Hex|T-handle METRIC Hex|L-key|Cat. III Voltage Detector|Rolling Case | Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind | Lockable Rolling Water Tight Case Keeps Your Tools Secure | Each Tool Has a Dedicated Position For Easy Storage Retrievals | Rigorous heat-treatment process for maximum strength
Wiha 32800 Insulated Tool Set with Screwdrivers, Nut Drivers, Pliers, Cutters, Ruler, Knife and Sockets in Rolling Tool Case, 80-Piece Set IncludesLong Nose Pliers: 6.3, 8.0"Bent Nose Pliers: 6.3"Long Flat Nose Pliers: 6.3"Combo Pliers / Crimpers:9.0"Diagonal Cutters: 6.3"High Leverage Cutters: 8.0"Cable Cutters: 6.3"Stripping Pliers: 6.3"Adjustable Wrench:8.0"Inch Insulated Sockets: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8"Metric Insulated Sockets: 13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mmInch Insulated Nutdrivers: 7/32, 1/4, 5/16, 3/8, 7/16"Metric Insulated Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mmInsulated Cable Knife: 50mm2 Meter RulerInch / MetricInsulated Ratchet: 3/8" DriveInsulated Extension Bar: 3/8 x 4.9"Single Pole Voltage DetectorInsulated Slotted Drivers: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mmInsulated Phillips Drivers: #0, #1, #2, #3Insulated Slt/Ph Terminal Drivers: #1, #2Insulated Square Drivers: #1, #2Insulated Torx Drivers: T6, T7, T8, T9, T10, T15, T20, T25, T30Insulated Inch T-handles: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"Insulated Metric T-handles: 4.0, 5.0, 6.0, 8.0mmInsulated L-Key: 10mm, 1/2"Specifications & Standards: EN/IEC 60900 ASTM F-1505-01 VDE 0682/part 201 DIN 7437 NFPA70E & CSAInsulated Tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use NFPA70E certified insulated protective outer wear when appropriate
